5 Broken Pipe Water Damage Clean Up Tips

A broken pipe in your home can quickly turn into a nightmare. If you notice any leaking, there is a chance that the pipe is eroded and is about to burst. However, many homeowners don’t notice these little signs. In the wintertime, when the weather is particularly cold, you may be dealing with frozen and burst water pipes.

This is why it can help to have some tips and tricks for cleaning up the water. Not only is the water messy – water damage can also cause a number of other problems. For instance, you may have warped floors, mold, mildew and structural instability. Ideally, you want to spring into action as soon as possible, or else the damage will worsen over time. Here are five broken pipe water damage clean up tips.

1. Mop up All of of the Puddles

As soon as the water bursts, you want to spring into action to mop up the puddles. The longer the puddles stick around, the more damage there will be. You can use towels, rags and mops to soak up all the liquid.

2. Look for Areas of Warped Wood

If there are areas of warped wood, you may need to make repairs right away. For instance, if wood beams behind your walls have been affected, you may need to pull the dry wall out and replace the wood beams. If you aren’t sure how to complete this job, you may want to call in the professionals. The last thing you want is to pull a major support beam, because it could cause structural damage to your home.

3. Use a Pig to Stop the Flow in Order to Fix the Pipe

Pipeline pigging is incredibly effective at allowing a homeowner the ability to a fix a broken pipe. Once the “pig” is entered into the pipe, it will block the flow, so that you don’t have to worry about more damage. If you need help installing the pig, you probably want to call a plumber. You could actually cause further damage if you aren’t sure how a pig works. Not only do you want to know how a pig is inserted, you also want to be able to pull it out effectively.

4. Turn Off Your Main Water Supply

If the pipe that has broken is a main water pipe, you will need to immediately find your main shut off valve. This valve is typically located outside, near your sidewalk. All you have to do is flip the lid and then move the lever into the off position. In most cases, you want to do this before cleaning anything up.

5. Make Sure There is No Mildew or Mold

On top of everything, you want to inspect for mildew or mold. There is a chance that mold has started to proliferate after the water pipe has broken. If there is mildew, there is a good chance that you have a strong odor brewing around the leak site. It is important to clean up the mold and mildew before it starts to cause structural damage. In the end, mold can be devastating if you don’t do anything about it.

Related posts:

  1. How to Find and Fix a Water Leak in Your Home
  2. How to Prevent Carpet Mold After Basement Water Damage
  3. The Most Common Causes of Roof Damage
  4. How to Identify the Causes of Mold, Moisture, and Mildew in Your Home
  5. How to Prevent Basement Water Problems in Your Home