When you insulate your home, one of the most important spaces to insulate is your attic. The truth of the matter is that most of the heat in your home is escaping through your attic. If you are wondering why it feels cold on the bottom floor of your home, there is a good chance that the attic is sucking out all the warm air. Plus, when the warm air escapes, it can cause ice and snow on your roof to melt and cause leakage, which can be a whole other mess that you probably don’t want to be dealing with. Before you insulate your attic, however, you want to be sure that you consider a number of important factors.
- The angle of your attic – if your attic is at a steep angle, you do not want to lay insulation beds; you may want to use foam. When it comes down to it, a lot of attics are too steep to actually get inside and lay insulation. If this is the case, you will want to use foam insulation, which is literally injected along the attic floor with a big reverse vacuum gun.
- The climate in your region – depending on the climate in your region, you may need a specific type of insulation. Insulation is usually categorized by an R-value – each R-value coordinates to a certain geographic region. If you live in a region that is particularly cold, you may have a higher R-value. Before you purchase insulation, you want to do your research about your climate region and R-value.
- The purpose of the room – instead of installing insulation, you may want to install thermal panels. If you are turning your attic into an entertainment room or a guest bedroom, you want to think of visiting the BlueRidge Company to purchase thermal insulation. This insulation is laid down below the floor and will offer radiant heat throughout the attic. It is much more efficient than central heating.
- The level of ventilation in your attic – you don’t typically want to place insulation in an attic that has zero ventilation. Some attics don’t have a ventilation system, because the un-insulated walls offer the right amount of airflow. However, if you block this airflow, it may get so humid in your attic that the walls start to become moist. When this happens, water damage can occur. This is exactly why you want to make room for ventilation by cutting a window into the side of your attic.
- The reason why you are adding insulation – if you live in an area where there is a moderate temperature, you may not need it. On top of everything, you may not even need to go through the trouble of insulating your attic. Indeed, if you live in a region where it doesn’t get too cold in the winter, you may want to leave your attic the way it is. In the end, you could be making your home too warm if you add insulation when you don’t have to.