A water leak can be a serious problem in your home. If you don’t find a leak and then take measures to fix it, you could wind up with severe water damage. The water damage can soak into the structural elements of your home and cause weakness in walls, partial collapse, mold, mildew and termites. When it comes down to it, finding and fixing the leak is all about tuning in to all your senses. Moreover, you have to know where some of your main shutoff valves are. If you catch a leak soon enough, you can drastically reduce the damage. Here is how to find and fix a water leak in your home.
- The pressure relief valve on your hot water tank – it may be leaking. Hot water tanks usually have an automatic pressure relief valve that goes off when there is too much pressure. Basically, this is to prevent a blow out. Sometimes, though, these valves can leak without you knowing. All you have to do is reset the relief valve setting to fix the leak.
- Listen for leaks in your toilet – something may be broken and need to be replaced. Our toilets are not impervious to the rigors of daily use. Springs get damaged and other parts may become dislodged. If you are hearing a constant ringing in your toilet, there is a good chance that you will need to get inside the tank of your toilet and replace a certain part.
- Check for leaks in your attic – you could have a leak in your roof, which will require professional service. Roof leaks can be especially troublesome – mostly because they can cause so much damage. However, finding roof leaks is relatively easy – all you have to do is head up to your attic and shine a flashlight along the edges of your roof. If you notice areas of moisture or discoloration, you may have leak. Your best bet is to call a service like Leak Masters to have the issue resolved in a timely manner.
- One of your pipes may be old and rusty – your main water valve will need to be turned off while you replace the section of broken pipe. If you have an older home, you may also have older pipes. If this is the case, you may experience a broken or damaged pipe. When this happens, you will need to head outside to turn off the main water supply. After that, you want to carefully remove the old pipe and replace it. If you have multiple pipes that need replacing, you may as well replace those too.
- Your faucets and shower heads may be old and leaky – you will need to replace them. In some cases, you may have leaking shower heads and faucets. To avoid wasted water and lime build up, you will probably want to completely replace the shower heads and the faucet. When it comes down to it, the issue will only get worse if you don’t fix the problem sooner rather than later.